If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Re: Desperate man needs parts for a sick OLD Saeco
Originally posted by 78515151171717390 link=1252041738/0#0 date=1252041737
Dear Brains Trust
My Saeco Combi has sprung a leak.
It is an old model, probably privately imported, and Saeco Australia and Coffee Italia cant help me.
The bit Im after is the black nylon (plastic) elbow that attaches the pump (pump has the BLACK housing) on one end and a nylon pipe running to the boiler on the other.
It has a four fingered snap fitting on a collar at both ends of the elbow. I believe this part was used on the early Via Venezia models avaliable in Australia.
Can anyone point me to someone who might carry this part. It is likely to be old stock.
An old dead Via Venzia might also do the trick.
All the best
Peter
Care to push up a photo... Makes all teh difference and many of us a visual rather than readers.. Thus a pic might grab someones attention..
It is an old model, probably privately imported, and Saeco Australia and Coffee Italia cant help me.
The bit Im after is the black nylon (plastic) elbow that attaches the pump (pump has the BLACK housing) on one end and a nylon pipe running to the boiler on the other.
It has a four fingered snap fitting on a collar at both ends of the elbow. I believe this part was used on the early Via Venezia models avaliable in Australia.
Can anyone point me to someone who might carry this part. It is likely to be old stock.
Leave a comment: