Announcement

Collapse
No announcement yet.

Whats the best machine, under $3,000

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • wattgn
    replied
    Re: Whats the best machine, under $3,000

    Ive got mine on a timer as well. I suppose I could just set it earlier but when we sleep with the bedroom door open it makes some noise. that big rotary pump, you know.

    I probably should make it 30 minutes earlier though.

    Grant

    Leave a comment:


  • mattyj
    replied
    Re: Whats the best machine, under $3,000

    Yeah Grant, I do a similar thing - give it a few flushes to heat the group, release some hot water through the hot water tap (to heat cups, and to force the element on, by adding cold water to the boiler), purge the steam arm a few times ... my idea is to get the boiler elements to cycle as often as possible ... thats gotta help, right?

    Well, thats the idea anyway.

    For $8, I got a timer (for another $4, I could have got 2!). I Havent looked back! Machine switches on at 5am, off at 8:30am, back on at 3pm, off at 6pm ...

    Leave a comment:


  • wattgn
    replied
    Re: Whats the best machine, under $3,000

    Just a point on heating up machines.

    I have a 3.4L boiler in my Bezzera 40P and I manage to wram it right up to temperature within 20 minutes just by pulling water through it several times.

    It is easy to do when the machine is plumbed in as water use is not an issue.

    Grant

    Leave a comment:


  • DavidR
    replied
    Re: Whats the best machine, under $3,000

    Thanks Pinot. The ECM distributor also recommended *not* plumbing in the Ghiotto.

    Leave a comment:


  • GR8WineandCoffee
    replied
    Re: Whats the best machine, under $3,000

    DavidR
    Over the years I have used and sold a number of Diadema and Giotto machines. For a domestic espresso machine these would be as close to perfection as you could get.
    But, you will still have to do a little bit of surfing!
    From personal experience, I would not be too keen to plumb this type of machine in.
    John

    Leave a comment:


  • DavidR
    replied
    Re: Whats the best machine, under $3,000

    Originally posted by luca link=1150703587/15#24 date=1151558281
    Shopping for any espresso machine is a matter of finding which little idiosyncracies are the least annoying to you.  Otherwise, there would be a clear market leader.  The best advice that anyone can give you is to actually go an try these machines for yourself.
    Much like buying a digital camera. As for a coffee machine, I want perfection if Im going to spend money. I guess Ive got spoilt - Im into Linn sound systems, and whatever you buy is pretty much perfect and spending more *always* gets you better sound...its a no-brainer really.

    Originally posted by luca link=1150703587/15#24 date=1151558281
    PS. Dont forget about the grinder.
    Ive got an Isomac Granmachinato which seems to do the job. Not that Ive done much looking, but the next step up in grinders seems to switch to doser-only (the GM is doserless).

    Leave a comment:


  • TC
    replied
    Re: Whats the best machine, under $3,000

    Id probably go the Minore II plumbed in version with the rotary pump, plum get a 2 holed tip from Coffeeparts as well as a LM group handle....plenty of change out of $3k to put towards a grinder fund and not too ridiculous a footprint........

    2mcm

    Leave a comment:


  • luca
    replied
    Re: Whats the best machine, under $3,000

    David, every espresso machine has little idiosyncracies, no matter how much they cost. For example, I dont like how the steam knobs on $10k La Marzocco lineas rotate around several times before anything actually happens. Every now and then we bump against the paddles on our $15k Synesso Cyncra and activate a pump.

    30mins to heat up is pretty much obligatory. If you dont like it, buy a sunbeam dual thermoblock. Otherwise, suck it up and do what everyone else does and just put the machine on a timer.

    All machines require some sort of temperature surf/flush routine. With the brewtus, you need to flush a certain amount to heat up the group. You will need to flush less on the second shot than on the first and you will find that if you make multiple shots in a row the group will heat up. With the giotto and most other HX machines where the restrictors and pstat arent ridiculously tuned, you will need to do a flush to purge the superheated water in the HX and might even want to wait a little bit for rebound time. The plus side is that you can use this to fool around with the temperature of the shots that you are extracting.

    I think that the Brewtus can easily and cheaply be converted to be plumbed in and out and you might be able to do the same with the other HX machines. Another alternative is the la spaziale s1, which has a caveat of 53mm portafilters. AFAIK, both the S1 and the Brewtus only have a resolution of 1C. If you want better resolution, you might want to investigate the Dalla Corte Mini Professional, but I gather that (a) thats a little way off still, (b) Im not sure what sort of support youll receive and how available parts will be and (c) it also has a 53mm pf. Also, I dont think that the S1 and the DCMP really let you fool around with preinfusion.

    The category killer machine would probably be the Nuova Simonelli Appia, which is a tank and plumb in version of the Aurelia. It doesnt seem to require much fiddling with temperature and, from what Ive seen, the NS preinfusion is extremely forgiving. Caveats? You betcha. I dont think that NS are importing them into Australia, they probably would cost a bit more than $3k and to get absolutely incredible temperature stability (the WBC tests showed that they didnt waver more than 0.1C in a shot) at different temperatures, you need to change the restrictors in the group.

    So there you have it. Shopping for any espresso machine is a matter of finding which little idiosyncracies are the least annoying to you. Otherwise, there would be a clear market leader. The best advice that anyone can give you is to actually go an try these machines for yourself. Personally, I find using all of these machines significantly easier than using my Silvia.

    Cheers,

    Luca

    PS. Dont forget about the grinder.

    Leave a comment:


  • DavidR
    replied
    Re: Whats the best machine, under $3,000

    OK - to confuse the issue - what about if I said I wanted the best machine under $3000 that can be fully plumbed in? A *real* annoyance with my ECM Botticelli II is the small water tank and small drip tray. It may only be twice a week that they need filling/emptying, but my brain says that spending $3K on a coffee machine ought to obviate the need to do these menial tasks.

    And BTW, the machine has to be something that doesnt take 30 mins to heat up.

    A final point, am I going to find little idiosyncracies with a Ghiotto, Brewtus etc? Ive just got used to temp surfing on the Botticelli, which I find annoying. As stated above, if Im spending $3K on a coffee machine, I would be unhappy if I still had lots of little caveats.

    Leave a comment:


  • GR8WineandCoffee
    replied
    Re: Whats the best machine, under $3,000

    Bart
    Looks like you are on track for some pretty good equipment.
    Apart from having sold Diadema and ECM machines in the past, I have also personally owned and extensively used the Diadema Junior, Giotto and the A1. I have also played with these machines alongside a number of grinders.
    If you would like to discuss any of these machines in depth (ie the pros and cons) feel free to call me at any time.

    John

    Leave a comment:


  • Bart
    replied
    Re: Whats the best machine, under $3,000

    Thankyou all, for some very helpful insights. You have tipped the balance, I must confess I was beginning to waver on the Iberital, due to my own nagging doubts and those of the minister for finance. Your comments have convinced me to sit on my hands for a while and curb my impulsiveness. Regrettably, I cancelled my order for the Iberital today, I think Ill hang on to the San Marino CK Compact while I carry out further research, but as I gaze into my crystal ball, Im almost certain that I see an ECM Veneziano in my future. Watch this space.

    Bart. :-/

    Leave a comment:


  • wattgn
    replied
    Re: Whats the best machine, under $3,000

    Interesting discussion.

    If you look at the guts of an espresso machine there isnt much there. I mean you could build one up from bits with then get a chassis and sheet metal, etc etc.

    Italian certainly doesnt mean good either. I think really you just have to look carefully at the materials used and how it is all put together.

    I think buying a new machine can be a trap for someone new to machines though so it doesnt hurt to pay extra for a machine that you are 100% confident of.

    I dont think thermosyphons count for much. All that is important is that the grouphead is kept near the temperature of the boiler and that can be done by conduction just as effectively.

    A commercial multi group machine MUST have thermosyphons as the single boiler has to service multiple groups and it the thermosyphon is the practical way to do this. There is no need with single group machine which is why most manufacturers dont bother.

    The reason theyre put on is because the punters demand it but I dont see any sound engineering or heat transfer reason why this is so.

    Anyway, caveat emptor, Bart. Just make sure that you have had a look at this machine inside and out and are confident that it will:

    1. Make good espresso
    2. Last
    3. Be reliable
    4. Make you feel good when you look at it in your kitchen

    Grant

    Leave a comment:


  • Sparky
    replied
    Re: Whats the best machine, under $3,000

    Im certainly with the "you dont get something for nothing" statement. The build quality of Spanish machines seems the be generally one level below the Italian machines. Of course thats a generalisation, but either someones not getting paid, theyre outsourcing to China or theyre cutting corners. Pick one.

    With a 6 l steam boiler, itll never run out of steam.

    w.r.to ECM, the Giotto is good, but that doesnt mean all ECMs are as good. I know of one supplier that has stopped selling the lower end ECM machines due to chronic unreliability. They still sell Giottos though.

    Leave a comment:


  • luca
    replied
    Re: Whats the best machine, under $3,000

    Originally posted by Fresh_Coffee link=1150703587/15#16 date=1151039529
    Just make sure you have ready access to service from a friendly, knowledgeable, expert service provider who you can rely upon whenever necessary.
    I so agree with that. The essential difference between the spanish machines and the ECM machines is that the former are built to a price point, whereas the latter are built to a quality point. The spanish machines are great in that they use relatively cheap parts to get to the same performance level, but it wouldnt surprise me if the caveat is that they fail more often. In home use Id imagine that all of these machines are well enough built to last quite some time, but parts will wear and tear and need to be replaced.

    Personally, I would try to stear clear of machines with electronics like the volumetric controls. You really dont need them at all in a home environment; theyre just another thing that can go wrong and are quite expensive to replace. In a commercial environment where one barista has a stream of orders to plough through, the volumetrics are useful, but at home you will never be so busy that you wouldnt cut the shots off manually. Hell, in the busiest cafe that I have worked in we still cut the shots off manually most of the time to make sure that we were getting the max out of the espresso before it went blonde. I bet that the guys who said that it is twice the machine were from coffee company - I was looking at the giotto last time I was there and they tried to convince me that the expobar with the volumetric keypads was better.

    Bottom line, though, the Lanna seems to have the right guts - relatively large boiler and a group head with thermosyphon and preinfusion.

    Cheers,

    Luca

    Leave a comment:


  • TC
    replied
    Re: Whats the best machine, under $3,000

    Yeah- I cant agree more, FC....We all know that you gets what you pays for...and no way is it twice the machine that the Veneziano A1 is. Its like comparing a Skoda to a Ferrari.

    Its a Spanish machine, not Italian- but I have no doubt that it will do the job and do so satisfactorily- as would many of the other options discussed and suggested. Does it have a tank too?? I thought that was a not-negotiable? :-?

    In my opinion it doesnt look half as good.....and thats before we switch it on...   :P Nevertheless, hope you enjoy your new toy, Bart....

    2mcm

    Leave a comment:

Working...
X