If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Originally posted by 42697E69786061646D080 link=1328874956/3#3 date=1328975924
HXs allow water to be flash heated to a consistent temperature and the large boilers typically used in HX systems are also able to heat and maintain the temperature of the large grouphead(s) commonly found on commercial machines.
HXs predate modern electronic heating and control circuitry with the advent of modern electronics leading to the appearance of thermoblocks in espresso machines.
HXs also provide the only solution available at the time without having your own Nuke to heat the brew water. You need to heat (say) 30ml of water for a single to 92C (say) from room temperature - that isnt easy - it is a lot of energy. Doing it electrically requires something like a thermoblock just to get the energy transferred from the metal to the water. With an HX, there is a "reservoir" of heated water in the HX loop.
I suspect people generally dont want the inside of their coffee machine to glow, or for the lights to dim when they pull a shot!
Originally posted by 7E7E6E72737F761A0 link=1328874956/2#2 date=1328922638
Ah... so its two purposes would be: Get the coffee out faster and regulate temperature?
Is it a lot different from thermoblock in concept and/or practice?
HXs allow water to be flash heated to a consistent temperature and the large boilers typically used in HX systems are also able to heat and maintain the temperature of the large grouphead(s) commonly found on commercial machines.
HXs predate modern electronic heating and control circuitry with the advent of modern electronics leading to the appearance of thermoblocks in espresso machines.
In practice an HX system and a thermoblock system do the same thing, deliver water at a certain temperature and volume to the basket of ground coffee. In many systems they also heat the grouphead(s). Designs of the two systems however vary widely between all the different machines out there in the marketplace.
Originally posted by 7E7E6E72737F761A0 link=1328702065/5#5 date=1328874954
So... whats an HX? Heat Exchange? I see the term used but I dont know what people mean.
Heat eXchanger. Its a, you guessed it, method of transferring heat. Its typically seen in prosumer and commercial machines and most frequently consists of a large test tube shaped metal cylinder (Part # 700236 here: http://www.coffeeparts.com.au/cimbali/cimbali-spare-parts-1) that sticks into the boiler. The brew water is injected into the tube where it is flash heated and then channeled to the brew head.
Leave a comment: