Announcement

Collapse
No announcement yet.

XMT7100 problem

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • XMT7100 problem

    Hi all, I've just PID'ed my machine (Older style Lelit PL042) using an XMT7100 controller. When I switch it on it works perfectly but after a variable amount of time the controller will shut down for no reason I can see. It's mounted externally away from the boiler so I wouldn't think temperature would be an issue (especially given ambient temps in Tassie right now). Am I missing something? or did I just get a dodgy unit? Any suggestions would be very much appreciated!

    Rob

  • #2
    What SSR are you using, and where is it located ?

    Comment


    • #3
      It's a cheapo Fotek 40amp mounted inside the right hand side of the case where the controller is mounted, as far from the boiler as possible.

      Comment


      • #4
        Suspect dodgy transformer in the controller. It's usually that simple.

        Comment


        • #5
          Yeah, probably right. I guess $25 doesn't buy a lot of QC. Cheers, Rob.

          Comment

          Working...
          X