Announcement

Collapse
No announcement yet.

Enlarging portafilter basket

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Jackster
    replied
    You have nothing to lose then. Heat it up red around the wall and jam in the tamper. Id think it will stuff the basket as the top lip will buckle and not seal.

    Leave a comment:


  • Arcade
    replied
    Have emailed them to see, that would be ideal if they can. Will post back if I find something.
    Last edited by Arcade; 8 February 2018, 05:14 PM.

    Leave a comment:


  • WhatEverBeansNecessary
    replied
    Pullman MIGHT - I think they do their own baskets, just not sure if they do that size. Maybe worth asking?

    Leave a comment:


  • Arcade
    replied
    Yeah but then will it be too small next time around is the question... ideally if I can find a company who are willing to measure a batch I'd buy 3-4 baskets just so I know I won't have any fitment issues later.

    Leave a comment:


  • Jackster
    replied
    Can always machine your tamper smaller to suit

    Leave a comment:


  • Arcade
    replied
    As a follow-on question, is there any place you can purchase 49mm portafilter baskets in specific sizes, like you can tampers (eg 49.4mm)? My previous basket was the one that came with my machine, and this new one is apparently a genuine replacement, and yet the sizing is different (as I imagine can happen with tolerances).

    Leave a comment:


  • Arcade
    replied
    Thanks guys, I think I realised this already but needed some reinforcement. Heh. So frustrating!

    Leave a comment:


  • Yelta
    replied
    Originally posted by Arcade View Post
    If I have a portafilter basket that is ~0.2mm undersize, would it be silly to try enlarging it by forcing my tamper down, perhaps with an interface such as baking paper to assist release and oversize it a tad so it's more free when done?

    Or am I asking for trouble by trying this?!
    I don't think there is a snow balls hope in hell of this working Arcade, the baskets are fabricated out of sheet steel and formed on a brake press or similar, capable of very high pressures.

    I suspect the easiest and cheapest way would be to buy a new basket of the correct size.
    Last edited by Yelta; 7 February 2018, 11:06 PM.

    Leave a comment:


  • WhatEverBeansNecessary
    replied
    Probably.

    Get a new basket or tamper that is slightly smaller/bigger is probably easier.

    Leave a comment:


  • Arcade
    started a topic Enlarging portafilter basket

    Enlarging portafilter basket

    If I have a portafilter basket that is ~0.2mm undersize, would it be silly to try enlarging it by forcing my tamper down, perhaps with an interface such as baking paper to assist release and oversize it a tad so it's more free when done?

    Or am I asking for trouble by trying this?!
Working...
X