Announcement

Collapse
No announcement yet.

water behaviour question

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • water behaviour question

    hi,

    after 2 strong lattes tonight it was time for a little clean up and then discovered that w/o the shower screen in place, the water exiting the middle hole of the group head comes out faster / harder and tends to flick about the place while the water from the four perimiter exit holes is calmer.

    hope the photo sort of helps in my description.

    im wondering if this is normal(ish) behaviour or is the pressure / temp too high?

    cheers
    aaron


  • #2
    Re: water behaviour question

    ahem...cough....(silence)....
    feeling a little silly...replaced the shower screen and realised (and why I ask did this not occur BEFORE posting) that the middle exit hole with the problematic water is kinda like plugged by the screw.... :-[

    BUT the water DOES NOT come out straight from the four remaining holes..should it?





    Comment


    • #3
      Re: water behaviour question

      It doesnt come out "symmetrically" on Silvia either, but its a moot point since its all going to hit a tightly packed puck jammed against the shower screen.

      Comment


      • #4
        Re: water behaviour question

        thanks reubster

        so i should worry less about assymetrical, messy water and worry more about interest rates? :-?

        Comment


        • #5
          Re: water behaviour question

          the shower screen is there as a diffuser, so worrying about interest rates is prob a better option

          Comment


          • #6
            Re: water behaviour question

            thanks people.
            time to refinance me thinks :-/

            Comment

            Working...
            X