Announcement

Collapse
No announcement yet.

Drip tray drain hose

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Drip tray drain hose

    My current machine came with the drain hose (silicone) my new one didn’t seem to be having trouble tracking down something suitable but grabbed some clear vinyl tubing from the local plumbing shop but they/I are not sure if it will be ok with the temperature of the drain water. Thoughts or some where in Oz that I can order something suitable from, inside diameter 14mm.....

  • #2
    Look up your nearest Commercial Machine / Cafe Technician.
    Comes in straight & clear.
    Or reinforced corrugated.

    To use what you have at least clamp it to the outlet.
    Better still just jettison it and get the proper stuff !
    Less chance of a costly incident....

    Comment


    • #3
      You could also look to grab some FEP Tubing of suitable diameter.
      Perfect for this type of duty...

      Mal.

      Comment


      • #4
        Junk day... Drain hose from a washing machine. Has a handy very tight 90° at the end.
        May not be 14mm though

        Comment


        • #5
          Thanks guys, truly expected that ECM would have included a length of drain tube in the kit but far from the end of the world. I have the vinyl tubing so will try that next week to see how it goes. Otherwise will eBay some silicone tubing, we are in lockdown down here again...... another “FU”.......Mal, looks like the FEP only goes up to 12mm ID.

          Comment


          • Mono
            Mono commented
            Editing a comment
            Ahh, sorry Mal, I had only checked out that link you posted had never heard of FEP before then. Did a test with just off boiling water into the collector and tubing. The tube got soft but at no stage did I feel it would fail. I’ll suss out eBay for that FEP tubing, ta.

          • Dimal
            Dimal commented
            Editing a comment
            Ah, I only posted up that link for your info to explain what FEP is and its capabilities...

          • Lyrebird
            Lyrebird commented
            Editing a comment
            The tubing in Mal's link is high pressure pneumatic supply tubing so it comes in sizes to suit pneumatic fittings.

            Since you don't need the pressure / temperature performance of this tubing you can use a thinner wall tube which will be cheaper (not that anything made of FEP is ever cheap).

            Mal: thanks for that link, I use pneumatic tubing in a couple of my wine technology devices and I didn't know it was available in FEP.

        • #6
          I have used reinforced clear 12mm hose for my drain but I’m not overly happy with it.
          I have bought some 12mm ID silicon hose from an on-line homebrew outlet that is much softer and easier to slip on and off the drain reservoir on my Lelit when I want to move the machine.
          I’m not too worried about solid fittings as it is only a gravity based drain.
          The real limiting factor is the 8mm ID outlet from the reservoir and the 100ml(approx) volume of the reservoir.
          I can see myself making a larger copper one with an 18mm outlet.
          I also want to put a breather pipe at the back of my cabinet where the horizontal(ish) drain from the machine connects to the vertical drain to the floor.

          Comment


          • #7
            @AA, took a leaf out of your book and searched home brew supply stores and found some reasonably priced 12.5 ID silicone tubing. I expect I’ll be able to stretch it over the drain’s barb without too much trouble. Can stretch the Rocket’s thin wall 9mm ID silicone tube successfully......thanks guys for all the recommendations and suggestions

            Comment


            • Lyrebird
              Lyrebird commented
              Editing a comment
              If you haven't ordered it yet I have a couple of metres of that tubing spare. I can send you a piece for the cost of postage or you can pick it up: I'm in Beechworth, my workshop is in the Old Beechworth Gaol

          • #8
            Hi LB, thank you for the very kind offer but I have ordered and paid.....But next time I’m over your way (I hope to head up Hotham on the bicycle before the onset of the cold weather) I will try to call in and introduce myself, I’ll message beforehand naturally.

            Comment


            • #9
              Sounds like a plan.

              Vintage starts Monday so I long rides are out for a while but I love the Hotham ride, when you get up The Meg and look down to Harrietville soooo far below, that's a blast.

              Comment


              • amberale
                amberale commented
                Editing a comment
                Is your vintage delayed with this years cool Summer?

              • Lyrebird
                Lyrebird commented
                Editing a comment
                No. On the ripeness testing done so far it looks like it will be within a couple of days of 2018 and 2019. We lost 2020 due to the bushfires so no comparison there.

                To really slow ripening you need lots of drizzly grey days that never get warm. We've had a few bursts of rain but the weather between has been ideal: sunny and warm but not too hot (we never got over 40 up here). Grape vines shut down in extreme heat so a very hot summer is not good for true ripening either. Things are looking very good right now, barring unforeseen events I think this will be a very good year.

            • #10
              Sounds good.
              All our fruit from early cherries to current late nectarines have been late ripening this year with (tongue tested) sugar being very slow to develop.
              We have also had a relatively cool summer.

              Comment

              Working...
              X