Announcement

Collapse
No announcement yet.

Vibiemme Junior-potential switch issue?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #31
    Also look at screwing the switch "inwards" towards the chassis. Locknut on the inside of the fascia, just loosen and adjust so the switch is not sticking out as far. This means actuation is a little further on the roll up of the lever, but mine has been fine like this for a long time (5+years now).

    Comment


    • #32
      Take a print of the picture in post 25 to akihabra, one of the stall holders will have the switch and will know who can instal it if you are not able to do it yourself.

      Comment

      Working...
      X