Announcement

Collapse
No announcement yet.

Downsizing from VBM Domobar Super

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Re: Downsizing from VBM Domobar Super

    Originally posted by 5755594456515858340 link=1274614424/10#10 date=1274707863

    I could be wrong ... Ive never seen a Jnr in the flesh and I might be just getting confused ... but I think it was established here that the depth of the Jnr is closer to 40cm.

    http://coffeesnobs.com.au/YaBB.pl?num=1272029845/18#18
    Its surprising that there is such a discrepancy between the specs and actual depth - I just measured my super as a sanity check and its 530mm as per ECA specs (that includes 25mm or so for the handle on the drip tray). So Im guessing the Jnr would just fit on a 380mm bench.

    I know its only 5cm .. but bench space is critical for us urban types. Especially those who would take good coffee over a house in Sydney.

    Comment


    • #17
      Re: Downsizing from VBM Domobar Super

      Originally posted by 515C5F4640040A330 link=1274614424/15#15 date=1274791573
      So Im guessing the Jnr would just fit on a 380mm bench.
      I just measured my junior, the specs are wrong, it actually is 42cm deep (in total not including the bulge for the handle on the drip tray) as per coffeeshots post above. So now I guess that would change the goal posts and you should consider other machines with a depth of 40cm or so, eg Diadema etc.

      Comment


      • #18
        Re: Downsizing from VBM Domobar Super

        Originally posted by 01060D0D061717630 link=1274614424/16#16 date=1274792968
        I just measured my junior, the specs are wrong, it actually is 42cm deep (in total not including the bulge for the handle on the drip tray) as per coffeeshots post above. So now I guess that would change the goal posts and you should consider other machines with a depth of 40cm or so, eg Diadema etc.
        Oh and I was that close to having my mind set on the Jnr based on a purely objective, mathematical decision. Its always the way!  I think I will need to go and inspect them up close when the time comes.  Cheers for the measurements though!

        Comment

        Working...
        X