Announcement

Collapse
No announcement yet.

ECM Giotto - Hissinh from the top , on and off hissing noise

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • javaboy
    replied
    Deleted. Posted here in error
    Last edited by javaboy; 22 September 2012, 10:28 AM.

    Leave a comment:


  • A_M
    replied
    Re: ECM Giotto - Hissinh from the top , on and off hissing noise

    Originally posted by 7C7E797E1D0 link=1286273666/2#2 date=1286279788
    Thanks, , ,  any help or a link to where I would get one ?  I live in north queensland so there are no dealers anywhere up here.

    Criag
    Coffee Parts over there to the left :-)

    Leave a comment:


  • acdc
    replied
    Re: ECM Giotto - Hissinh from the top , on and off hissing noise

    Thanks, , , any help or a link to where I would get one ? I live in north queensland so there are no dealers anywhere up here.

    Criag

    Leave a comment:


  • TC
    replied
    Re: ECM Giotto - Hissinh from the top , on and off hissing noise

    Originally posted by 4D4F484F2C0 link=1286273666/0#0 date=1286273666
    Hi All.  My Giotto ( non premium ) is hissing from what looks like some kind of pressure relief valve on the top of the machine, just under the holes in the top cover.

    It waits till it gets hot, then the hissing starts and goes for about 10 seconds, then stops for about 10s, , then starts again.

    Im thinking this is a faulty valve or something ?  Any ideas ?

    thanks in advance.

    Craig
    Hi Craig,

    Assuming youre seeing circa 1.2 bar boiler pressure, you need to replace the safety valve. Factor around $40 and some time if you need a tech to do it for you.

    Good luck
    2mcm

    Leave a comment:


  • ECM Giotto - Hissinh from the top , on and off hissing noise

    Hi All.  My Giotto ( non premium ) is hissing from what looks like some kind of pressure relief valve on the top of the machine, just under the holes in the top cover.

    It waits till it gets hot, then the hissing starts and goes for about 10 seconds, then stops for about 10s, , then starts again.

    Im thinking this is a faulty valve or something ?  Any ideas ?

    thanks in advance.

    Craig
Working...
X