Announcement
Collapse
No announcement yet.
Expobar Minore III - Mods
Collapse
X
-
Its always good to see old posts pop up which gives you ideas of doing things to the machines we own. I agree the wooden handles are nice. Making me want to do the same to mine
- Flag
-
I would like to get Bezzera Giulia tap assemblies for my ExpoBar Minore III.
Does anyone know how far they stick out?
- Flag
Leave a comment:
-
Re: Expobar Minore III - Mods
Originally posted by 5B74717067150 link=1299914188/6#6 date=1301093544Any steam tip mods? I dont like the two hole tip on the new Minore III
How did you perform temp checks? Scace or another way???
Cheers
Home made scace and other test equipment.
Latest pic but I had teh shakes

- Flag
Leave a comment:
-
Re: Expobar Minore III - Mods
Any steam tip mods? I dont like the two hole tip on the new Minore III
How did you perform temp checks? Scace or another way???
Cheers
- Flag
Leave a comment:
-
Re: Expobar Minore III - Mods
ROFLMAOOriginally posted by 7854575255646C3B0 link=1299914188/4#4 date=1300145973And as you only need 1 set for your machine, Id like some too
Hows the 24 g basket working?
What other mods have you done?

All in good time
24g basket is still taking some getting use to. Also have some commercial beans at the moment and I think I will revert back to my known roasts....
Mods to date are really some tweaks as to the PID profile / Steam Pressure and Group Pressure with a Temp check to confirm the PID offset.
Now it is about learning how to get the best from it re Grind / Bean / Tamp... OH and also learning to do milk again ;D
- Flag
Leave a comment:
-
Re: Expobar Minore III - Mods
And as you only need 1 set for your machine, Id like some tooOriginally posted by 537E7C7A7776721F0 link=1299914188/3#3 date=1300014256Nice AM, we need piccies when you get it all installed
Hows the 24 g basket working?
What other mods have you done?
- Flag
Leave a comment:
-
Re: Expobar Minore III - Mods
Nice AM, we need piccies when you get it all installed.
- Flag
Leave a comment:
-
Re: Expobar Minore III - Mods
8mm Metric ;DOriginally posted by 122734550 link=1299914188/1#1 date=1299920677As for the small handle I dont know if it screws off or not some one else asked that question before...
Gra..
Made up;
1: 2 x Tas Oak PF Handles
2: 2 xKwila PF Handles
3: 1 x Mango PF Handle
4: 2 x Kwila Small Levers
5: 2 x Kwila Steam/Hot Water tap handles
All but the Tap handles have had a coat of Marine varnish as yet to machine some scallops into them.
Beat watching TV ;D
- Flag
Leave a comment:
-
Re: Expobar Minore III - Mods
Good that you liked the PNGs mate I finished off the last of the bag this week. Best I keep a low profile for a while ay ;D As for the small handle I dont know if it screws off or not some one else asked that question before...Originally posted by 123D3436211E323D3234363E363D27530 link=1299914188/0#0 date=1299914188I will ignore the mods and tweeks that I have performed as to enhancing performance and the additional hardware I bought due to the CS Meet and Greet (Gra your a dead man... Oh by the way, those png Elephant; Are OK).
Gra..
- Flag
Leave a comment:
-
Expobar Minore III - Mods
I will ignore the mods and tweeks that I have performed as to enhancing performance and the additional hardware I bought due to the CS Meet and Greet (Gra your a dead man... Oh by the way, those png Elephant; Are OK).
Wife still likes the DCM over the Minore III, which is 8-) 8-)
Have roughed out two group handles, two taps (Steam and HotWater) and a rough blank for the mini lever used to run the system ( All in a red hardwood). Also looking to remove the Exopbar name off the waist tray and use the mounting holes to mount a handle :-?
With the mini lever knob I thought it might be screwed on, however it appears to just spin on the shaft.
My question is:
Does any one know first hand; if the plastic knob on this small lever is screwed or just pressed on ? I do not want to use brute force if not needed.Tags: None
- Flag

Leave a comment: