Announcement

Collapse
No announcement yet.

Giotto Brew Temp

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Giotto Brew Temp

    I just got a new Rocket Giotto & thought Id post the results of my brew temps.

    Using a Scace 1 device the results were a little disappointing. Right out of the box it was stable but low. Directly after a 2 sec purge the initial few secs were at 86, then slowly ramping up to 90 over the next 5-10 secs than sat ~90 for the remainder of the 25 sec test.

    I repeated this several times with the results being much the same.

    Also the pressure at the head was high, 10.5bar

    Phil

  • #2
    Re: Giotto Brew Temp

    Originally posted by mcknightp link=1213589524/0#0 date=1213589523
    I just got a new Rocket Giotto & thought Id post the results of my brew temps.

    Using a Scace 1 device the results were a little disappointing. Right out of the box it was stable but low. Directly after a 2 sec purge the initial few secs were at 86, then slowly ramping up to 90 over the next 5-10 secs than sat ~90 for the remainder of the 25 sec test.

    I repeated this several times with the results being much the same.

    Also the pressure at the head was high, 10.5bar

    Phil
    Interesting Phil,

    Thats about wed expect of an unmodified machine- straight out of the box- prior to bench testing and calibration.

    Sounds to me like your dealer might have just switched the machine on to check that it worked :-?

    Chris

    Comment

    Working...
    X