Announcement

Collapse
No announcement yet.

Giotto Rocket group head no water

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • MeanzBeanz
    replied
    Glad it worked out for you Barry. As a fellow Rocket Giotto owner for 6 years now I can vouch for the reliability of these machines. Just some simple home maintenance like fresh water flushes, chemical back flushes and descaling if and when required will help keep you in coffee Nirvana for a long time.

    Plus one for Chris at Talk Coffee too. I purchased my RG and Mazzer grinder from him as he offered excellent pre and post sales help. You see him here a lot helping CS members.

    Leave a comment:


  • TC
    replied
    Glad you found the problem Barry,

    Hope your machine gives you much pleasure.

    Chris

    Leave a comment:


  • JohnA
    replied
    great turn out, and great help from one of the sponsors on here.
    Chris to the rescue again.

    Leave a comment:


  • Barry2000
    replied
    Update, quick trip to Bunnings to get the right spanner (taped to make sure didn't scratch the bolts). Pull the gicleur out and the spring and plunger thingy water started to drip through the group head. Reassembled, turned on waited to reheat. Pulled group head lever and a steady stream of water came through.

    Many Thanks to >Talk_Coffee for the step though trouble finding techiniques.

    Now on to learning how how to make better coffee.

    Thanks to all forum members who came up with suggestions on how to fix

    Leave a comment:


  • TC
    replied
    Try checking the gicleur yourself. 7mm socket and a spanner required. Easy fix if it's just a blockage.

    The shop will charge you a callout and service fee if they have techs on the road as your machine is out of warranty.

    Leave a comment:


  • Barry2000
    replied
    Hi JohnA, yep pump activates when lever is pulled

    Leave a comment:


  • Barry2000
    replied
    Okay, thanks for your help, think I will call the shop where it came from tomorrow and see if they can send someone out to have a look.

    Leave a comment:


  • JohnA
    replied
    when you pull the lever is the pump activating?

    edit.... just re read your earlier post and seems pump in activating.

    id just take it to someone and have it looked at

    Leave a comment:


  • TC
    replied
    Ahh ok... Most likely blocked gicleur in the group (google an e-61 diagram) or less likely an issue at the solenoid.

    Leave a comment:


  • Barry2000
    replied
    Refilled using plain tap water, reseated the tank a number of times. Let it heat up, opened the hot water wand until the it drank from tank (seemed to drink longer then what I had the wand open for) operated the lever, and no change. Still no water through grouphead.

    Is is there any chance that there is an air lock?

    unboxed yesterday, but has been in storage (unopened) since Jan 2015

    Leave a comment:


  • TC
    replied
    Originally posted by Barry2000 View Post
    Checked on line and the feedback was that the water was demineralised and add a pinch of salt so the machine would recognise the full tank.
    Don't use demineralised water. Ever.

    For this fill, use plain tap water. Let if heat. open the hot water wand until it drinks from the tank and then try again.

    Sounds to me like the operation you purchased from did not bench test your machine.

    Leave a comment:


  • Barry2000
    replied
    Thanks all, for the responses so far. I will give reseating the tank a go. The water quality is fine we are in Melb and have good quality water. When I first turned it on (used filtered water) the green light started flashing. Checked on line and the feedback was that the water was demineralised and add a pinch of salt so the machine would recognise the full tank. That worked.

    Now the boiler fills and heats up, just when it hits pressure it expels a puff of steam from top of machine, steam arm works at full pressure, and hot water flows out of the water wand. When engaging the lever for the group head the pressure gauge reads 8 bar and the pump engages, but no water flows through the group head. Shower basket is bone dry.

    PiD is at factory default on 123

    Leave a comment:


  • TC
    replied
    I'd doubt that it's a DOA. In 10 years of selling Giotto, we have never experienced one. Check water quality and that the tank is correctly seated. Pump it up and down a little in its coupling.

    Contact the operation you purchased the machine from.

    Leave a comment:


  • Stan
    replied
    Contact the dealer you purchased it from. They will know what to do or alternatively replace/repair it as it is DOA.

    Leave a comment:


  • Barry2000
    replied
    Yes it is just unpacked it today

    Leave a comment:

Working...
X