According to the specs that machine is supposed to have a low water level cutout to protect the pump. So that must have failed if it was running and dry when you found it.
If you are hearing a click the most likely problem is the pump itself. You could confirm this by opening the case and measuring voltage at the pump after the click. I can't find where you would buy the pump but I think it's a pretty generic item.
Announcement
Collapse
No announcement yet.
G.Bezerra bz99 pumping/pressure issue
Collapse
X
-
When you say "water still comes out of the machine", do you mean from the group, or the water wand?
- Flag
Leave a comment:
-
Is the water level detector working? My old one needed the nuts to be tightened every now and then
- Flag
Leave a comment:
-
G.Bezerra bz99 pumping/pressure issue
Hi all,
i have a Bezerra bz99 , it's 15 yrs old . It's in very good condition up to this morning !
i think my 3 yr old pressed the green button on this morning in his attempt to make us coffee.
i think it was going for approx 20 mins before we found it and turned it off .
now when I turn it on there is no vibrating noise . Water still comes out of the machine , but no pumping / vibration noise . There is only a 'click' when I press the green button .
any info would be much appreciated.
i can feel the withdrawals happening already .
TIATags: None
- Flag

Leave a comment: