I just acquired a Sanremo Compact CK (older version) which had been a backup machine for a cafe of a family member and well looked after. They had it serviced and placed in storage and decided they no longer needed it. I plugged it in filled the internal tank and turned machine on, it makes an audible solenoid click but the pump does not engage to fill the boiler and the machine does not heat up.
I am thinking that it might be left in plumbed in mode rather than tank mode as the machine has been used both ways in past however I don't seem to be able to get it to go. Have thrown the switch on the side that is under the black plastic hood assuming this is to switch between plumbed and tank but it does not rectify the issue.
Pics for reference
I am thinking that it might be left in plumbed in mode rather than tank mode as the machine has been used both ways in past however I don't seem to be able to get it to go. Have thrown the switch on the side that is under the black plastic hood assuming this is to switch between plumbed and tank but it does not rectify the issue.
Pics for reference

Comment