Announcement

Collapse
No announcement yet.

Bezzera Magica steam levers not holding locking in

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Bezzera Magica steam levers not holding locking in

    Hi,

    I recently purchased a Bezzera Magica and am really enjoying it, however the steam lever does not lock in place any more. If you push it up, it should stay on, and if you push it down it should spring back (you have to hold it down).

    Mine did this for about 2 days. Nowm I have to hold it in place in both positions.

    Does anyone know how to fix this? I imagine it will be an easy fix, but not sure how to do it.

    Thanks

  • #2
    Have you contacted the vendor from who you purchased it, as yet?

    Mal.

    Comment


    • #3
      Originally posted by sten186 View Post
      Hi,

      I recently purchased a Bezzera Magica and am really enjoying it, however the steam lever does not lock in place any more. If you push it up, it should stay on, and if you push it down it should spring back (you have to hold it down).

      Mine did this for about 2 days. Nowm I have to hold it in place in both positions.

      Does anyone know how to fix this? I imagine it will be an easy fix, but not sure how to do it.

      Thanks
      The cylinder may have moved off centre
      Try the lock position in the 11 o’clock and 1 o’clock position to find out
      Otherwise speak to the seller to have a look at it ( if possible ) or get an authority to have a local service centre to inspect

      KK

      Comment


      • #4
        The lock position on my BZ10 can be moved 360degrees when in locked position.
        I moved it so it's on to the left and turn off to the right when I finished steaming the milk.
        Try a few positions to find out if it's worn or just moved around.

        Comment


        • #5
          Hi Sten186;

          This is easy, just give a call and I will explain to you how to do it.

          Regards

          Renzo

          Comment


          • #6
            Way to go Renzo...

            Mal.

            Comment

            Working...
            X