If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I have a bit of a problem with my Isomac Tea, in particular the steam wand. I keeps coming loose at the joint. I have tightened it a few times, but with ue, it undose itself. In adition to this, a while back I noticed what appeared to be a portion of an O ring come out of the actual articulation joint. Is this a repair that I could attempt myself or would I be advised to take it to an authorised repairer? There is no leaking coming from the joint itself, only when the nut comes loose about the wand. The machine is out of warranty. I would need steering in regards to sourcing parts also.
Regards,
Matt
Should be an easy repair Matt, probably an O ring or similar that needs replacing, Coffee Parts, a site sponsor, should be able to help. https://www.coffeeparts.com.au/
I have a bit of a problem with my Isomac Tea, in particular the steam wand. I keeps coming loose at the joint. I have tightened it a few times, but with ue, it undose itself. In adition to this, a while back I noticed what appeared to be a portion of an O ring come out of the actual articulation joint. Is this a repair that I could attempt myself or would I be advised to take it to an authorised repairer? There is no leaking coming from the joint itself, only when the nut comes loose about the wand. The machine is out of warranty. I would need steering in regards to sourcing parts also.
Leave a comment: