Announcement

Collapse
No announcement yet.

Isomac Tea steam wand woes

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Isomac Tea steam wand woes

    Good afternoon friends,

    I have a bit of a problem with my Isomac Tea, in particular the steam wand. I keeps coming loose at the joint. I have tightened it a few times, but with ue, it undose itself. In adition to this, a while back I noticed what appeared to be a portion of an O ring come out of the actual articulation joint. Is this a repair that I could attempt myself or would I be advised to take it to an authorised repairer? There is no leaking coming from the joint itself, only when the nut comes loose about the wand. The machine is out of warranty. I would need steering in regards to sourcing parts also.

    Regards,

    Matt

  • #2
    Originally posted by mattfinish View Post
    Good afternoon friends,

    I have a bit of a problem with my Isomac Tea, in particular the steam wand. I keeps coming loose at the joint. I have tightened it a few times, but with ue, it undose itself. In adition to this, a while back I noticed what appeared to be a portion of an O ring come out of the actual articulation joint. Is this a repair that I could attempt myself or would I be advised to take it to an authorised repairer? There is no leaking coming from the joint itself, only when the nut comes loose about the wand. The machine is out of warranty. I would need steering in regards to sourcing parts also.

    Regards,

    Matt

    Should be an easy repair Matt, probably an O ring or similar that needs replacing, Coffee Parts, a site sponsor, should be able to help.
    https://www.coffeeparts.com.au/

    Comment


    • #3
      Thank you Yelta. I really appreciate your response. I will contact Coffee Parts and see what their thoughts are.

      Cheers,

      Matt.

      Comment


      • #4
        Originally posted by mattfinish View Post
        Thank you Yelta. I really appreciate your response. I will contact Coffee Parts and see what their thoughts are.

        Cheers,

        Matt.
        Lets know how you get on Matt, always good to know if and how an issue is resolved.

        Comment

        Working...
        X