Announcement

Collapse
No announcement yet.

Giotto startup problem

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Giotto startup problem

    My Giotto tries to start when switched on but just 'clicks'. Any ideas on why this is happening? I have replaced the thermostat and the solenoid and it started up the first time after the new solenoid was installed, then reverted to it's old wicked ways on the next attempt to switch on

  • #2
    It sounds like your control board is cactus.

    Comment


    • #3
      Hmmm...that sounds bad
      Thanks for the response & I will investigate.....
      Was hoping not the controller board as that is quite expensive but as I am fast running out of options to solve this that may be my next step

      Comment


      • #4
        I believe there is a Brisbane company that does an aftermarket board for around$150 I think it's the same people that do the dot shot timer

        Comment


        • Picnic
          Picnic commented
          Editing a comment
          Thanks Hoggy42 I'll try to track them down
      Working...
      X