Announcement
Collapse
No announcement yet.
VBM water issue
Collapse
X
-
yeah ithink maybe block somewhere and try descaling the machine. or could another possiblity is the opv problem
- Flag
-
Thanks, It seems to have settled down. Working fine.Originally posted by leemobilecoffee View Posti dont think it is pump issue. Did you pull the lever fully up? When there is no water comes out, does the pump running? I think could be your microswitch .
When I pulled the lever up, the pump engaged and ran, but no water came out.
So probably not a pump issue?
- Flag
-
i dont think it is pump issue. Did you pull the lever fully up? When there is no water comes out, does the pump running? I think could be your microswitch .
- Flag
Leave a comment:
-
Thanks for the questions.Originally posted by EspressoAdventurer View Post
Beenz would you measure / time the flow.
200 -240g in 30 sec is an avge baseline.
Check at the mushroom and gicleur as to their state / condition.
If your comfortable / competent with AC240 remove the side panels and observe the water lines for obv signs of scale buildup.
What area of Aust are you?
Std water is described as ( hard etc.) ?
I'll pull apart the mushroom and have a look.
The machine looks to have no obvious issues. Photos attached.
It's been working fine since I posted.
The normal amount of water is coming thru. No tubes where it is less.
I live in Sydney, just moved and had it serviced early last year.
- Flag
Leave a comment:
-
Beenz would you measure / time the flow.Originally posted by Beenz View PostHi There,
I'm after some ideas what could be the issue
I have a 2012 VBM Domobar Super with a factory fitted rotary pump.
When i turn on the lever, the pump engages, but sometimes the normal amount of water comes out, sometimes about half, sometimes almost none.
So, I'm assuming it is a pump issue....
Any suggestions?
Thanks in advance
200 -240g in 30 sec is an avge baseline.
Check at the mushroom and gicleur as to their state / condition.
If your comfortable / competent with AC240 remove the side panels and observe the water lines for obv signs of scale buildup.
What area of Aust are you?
Std water is described as ( hard etc.) ?
- Flag
Leave a comment:
-
VBM water issue
Hi There,
I'm after some ideas what could be the issue
I have a 2012 VBM Domobar Super with a factory fitted rotary pump.
When i turn on the lever, the pump engages, but sometimes the normal amount of water comes out, sometimes about half, sometimes almost none.
So, I'm assuming it is a pump issue....
Any suggestions?
Thanks in advance

Leave a comment: