My ageing Expobar Office Control had a problem during use. Poured one shot ok then triggered the meter box circuit breakers.
When the power was turned back on at the meter and then on the machine, the two red lights went on , but nothing else.
Usually the green button lights flash once and then the pump comes on the fill the boiler and then the water begins to heat.
Any ideas on where to start looking for possible causes or failures? It would be great if it was something simple.
Thanks Peter.
When the power was turned back on at the meter and then on the machine, the two red lights went on , but nothing else.
Usually the green button lights flash once and then the pump comes on the fill the boiler and then the water begins to heat.
Any ideas on where to start looking for possible causes or failures? It would be great if it was something simple.
Thanks Peter.



Comment