Announcement

Collapse
No announcement yet.

A Week with Mazzer Kony -e

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #46
    Thanks BLrdFX,
    I'll look into that, did you get them from the States?

    Matt: can I ask you where you go to get the aluminium hopper?
    that's looks pretty cool too.

    Comment


    • #47
      Hi Joyo
      I was fortunate enough get an offcut from a very generous snubber who had some laying around
      But you'll need to do some measuring - the robur throat is 60.5mm, and 60mm with 3mm wall is a standard aluminium size. Is that the same as the Kony?
      Here is where I worked out what I could get… where are you based? This mob is in sydney. Or Scaffolding guys? We were a bit limited in options out here in the country

      Aluminium Warehouse » Tube Round


      Matt

      Comment


      • #48
        Thanks Matt
        very generous snobber indeed.

        I'm in Melbourne

        The inside diameter of the Kony collar is just on 60mm, so I say pretty similar to the robur, or perhaps just slightly smaller

        I managed to remove the hopper without breaking the tabs,
        so looking to do something similar to you

        Thanks for that tip

        Comment


        • #49
          Hi joyo keep us posted if you find anything available in Melbourne. I have a mini but I think the ID may be the same.

          Comment


          • #50
            Still trying to find anything that works well.
            I've just been using it with the collar and a tamper on top to stop beans bouncing out. Not the prettiest.

            Comment


            • #51
              Where are you looking, Joyo?

              Get yourself to a sheet metal fabricator and ask for an off cut.

              D.M.G. All Metal Fabrication & Welding - Sheet Metal Workers - Burwood, VIC - Yellow Pages®

              or an acrylic plastic supplier: if they say they don't cut ...... just ask. You only need 150mm.

              Plastics For Industry

              Acrylic Clear Tube Dia.60mm x 2mm x 1M long

              Engineering Plastics | Industrial Plastics | Plastic Fabrication

              ACRYLIC ROD AND TUBE, Holland Plastics, plastic fabrication

              Comment


              • #52
                Thanks chokkidog for those links,
                I'm in Burwood, will check them out, thanks again

                Comment

                Working...
                X