Announcement

Collapse
No announcement yet.

Cleaning your EM4x0 in 3 seconds

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • m3louis
    replied
    Re: Cleaning your EM4x0 in 3 seconds

    awsome, i need to try this

    Leave a comment:


  • colinwen
    replied
    Re: Cleaning your EM4x0 in 3 seconds

    Sounds like a good idea.
    I may use that for clean my grinder sooner or later.

    Leave a comment:


  • Darkfalz
    started a topic Cleaning your EM4x0 in 3 seconds

    Cleaning your EM4x0 in 3 seconds

    Might sound unconventional to some but I recently discovered a way to clean out my EM450 in about 3 seconds.

    Basically, you remove the rubber attachment (for domestic groups) and attach a vacuum cleaner to the spout. Mine has a plastic end that plugs into the steel telescopic rod, so I use that and its a perfect fit (I give it a wipe around the rim first for the "yuck" factor).

    Then turn the vacuum cleaner on for about 3 seconds. It sucks out just about every little grind both on the burrs and spout, and most importantly, all that hard to remove build up in the transport in between. You can also do a quick suck above the burrs to get any loose bits on top.

    No more banging on the base for 20 minutes trying to dislodge gronds, or brushing everything out in the sink.
Working...
X