Announcement

Collapse
No announcement yet.

Mini Mazz Help

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Koffee_Kosmo
    replied
    Re: Mini Mazz Help

    Switch off power from the wall
    Turn adjusting collar until blades touch
    Mark that position with white-out if you want to

    Back off a little and do test grinds
    Mark those positions with white-out if you want to

    Its always trial and error

    KK

    Leave a comment:


  • flynnaus
    replied
    Re: Mini Mazz Help

    Depends on the grinder as no two Minis are necessarily the same. I assume the factory sticker is gone.

    On mine, the "starting point" is around the "6" mark on the collar. There is a hole where the collar adjustment lever can screw into and my adjustments are around this point. Yours would likely be different.

    You can see it in this pic from the Home Barista website:



    Leave a comment:


  • scollops
    started a topic Mini Mazz Help

    Mini Mazz Help

    Would anyone know how to quickly setup the Mini mazz - I packed it sometime ago - to cut a long story short there not markings I can see as to where I should start my coffee grinding. It has been turned all the way down to fine - when I purchased it was good to go - now its gone - short of buying a bag of rubbish beans to test need some help - thanks
Working...
X