Announcement

Collapse
No announcement yet.

Replacing Super Jolly Burrs

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Replacing Super Jolly Burrs

    Greetings all

    I have been using my SJ for just over a 2 years now and would like to replace the burrs.

    Does anyone have any advice or a link to start off with. Have done a google and coffee snob search but no luck....yet.

  • #2
    Re: Replacing Super Jolly Burrs

    Originally posted by 6753404F424E210 link=1268915821/0#0 date=1268915821
    Greetings all

    I have been using my SJ for just over a 2 years now and would like to replace the burrs.

    Does anyone have any advice or a link to start off with. Have done a google and coffee snob search but no luck....yet.
    Google on your key words...

    Found this and some good pics about 3/4 down the page... You can do teh reading...

    http://www.home-barista.com/marketplace/mazzer-super-jolly-duranium-burrs-at-greatinfusions-t6041.html

    Comment


    • #3
      Re: Replacing Super Jolly Burrs

      http://www.coffeeparts.com/mazzer/mazzer-spare-parts-1.html


      Youtube video on replacing the burr carrier on Mazzer Mini (the same)

      http://www.youtube.com/watch?v=fCWVbSW_sAc

      Comment


      • #4
        Re: Replacing Super Jolly Burrs

        Originally posted by 634C4547506F434C4345474F474C56220 link=1268915821/1#1 date=1268916270
        Found this and some good pics about 3/4 down the page... You can do teh reading...

        http://www.home-barista.com/marketplace/mazzer-super-jolly-duranium-burrs-at-greatinfusions-t6041.html
        Hmmm...

        I wouldnt use the method that he is using to lock the motor shaft though (risks upper bearing damage)... Far safer to identify a short piece of wooden dowel that will fit through the discharge chute and brace against one of the grounds slingers.....

        Referring to this photo....

        Mal.

        Comment


        • #5
          Re: Replacing Super Jolly Burrs

          Hey, thanks guys for the info, much appreciated.
          I saw the link to the video but completely missed the one at barista which was probably the most helpful.

          Getting a dowel into the discharge chute to stabilise things seems a bit better bet too.
          Thanks again all.
          Let you know how I go.
          F

          Comment


          • #6
            Re: Replacing Super Jolly Burrs

            How do the old and new burrs compare on a close visual inspection?

            Comment


            • #7
              Re: Replacing Super Jolly Burrs

              Ive just finished replacing the burrs on my Anfim and as mal says wood doweling (I used 4 chopsticks) through the chute is the way to go.

              Comment


              • #8
                Re: Replacing Super Jolly Burrs

                How much coffee have you put through. For home use 2 years should just about see the burrs starting to be run in

                Cheers

                Comment

                Working...
                X