If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Originally posted by 66787A7E706C7170767E150 link=1272928046/0#0 date=1272928046
3)I also noticed that the washer under the brass centre nut was off centre.Is it supposed to be this way to throw the beans out or is it supposed to be centred?Im suspecting that this may be a cause of the problems?
My washer is the same of centre no worries though ....
Ive pulled the burrs off, cleaned, and replaced. It seems to be working a little better. However...
1) Theres still a fair amount of noise (squeaking etc.) that sounds like its out of balance.
2) It also stopped grinding again (though the burrs were moving) when I was adjusting the burr carrier to a finer level. This seems to have rectified itself, but is a bit worrying.
3) I also noticed that the washer under the brass centre nut was off centre. Is it supposed to be this way to throw the beans out or is it supposed to be centred? Im suspecting that this may be a cause of the problems?
Leave a comment: