If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Does anyone else have problems with the mini mazzar spiling coffee out to the left,l have played around with the doser which didnt make any difference.
Search for Schectermatic. Its a tiny paper funnel you can print, cut and stick in the underside of the doser, makes for dead straight dispensing. I have it on my Mazzer. Will try get a pic for you
* edit: link to pic. http://thebeaningoflife.com/schectermatic
I should mention there are a number of solutions for this, but this is the easiest and cheapest in my opinion. If you have a printer and a sheet of paper, you can do it. Mine has been installed for over a year now, probably should replace it, it looks a bit manky now
There are some schmik commercial solutions, like a fancy plastic one you can install by dismantling your doser.
I sometimes wish I bought the mini-e, especially considering I usually only ever make one single brew at a time. I dont need the measured shot as I already dose the hopper with only what I need for one shot. Sometimes I remove the hopper, and just fill the throat of the Mazzer with the measured beans, and close it off with an old tamper. I would be keen for an off the shelf chute conversion of some kind. Replace the doser with a simple shoot.
Originally posted by 5C777B73655B160 link=1303442670/3#3 date=1303446128
Mine has been installed for over a year now, probably should replace it, it looks a bit manky now
I made mine out of a thin ice cream container from the same template. It seems to work really well. Thinking of using an overhead transparency next time.
Comment