Announcement

Collapse
No announcement yet.

Anyone have a funnel sitting on top of Portafilter?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Anyone have a funnel sitting on top of Portafilter?

    Hi Everyone,
    I know it sounds weird, but when looking at accessories a while ago I saw a plastic funnel that sits on top of the portafilter, making it wider and higher, so the coffee doesn't spill over the sides.
    I now own a Ponte Vecchio Lusso, and the PF is 45mm, and rather deep, so want to prevent coffee spilling over, and get a bit of height, as it compacts down a lot when tamped.
    Anyone know what I am talking about and where to get them?
    Ta

  • #2
    Hi Beenz

    You are talking about an orphanespresso dosing funnel, made by Doug and Barg. Google orphanespresso and you'll find them.

    Cheers

    Sniff

    Comment


    • #3
      Originally posted by SniffCoffee View Post
      Hi Beenz

      You are talking about an orphanespresso dosing funnel, made by Doug and Barg. Google orphanespresso and you'll find them.

      Cheers

      Sniff
      Great, thanks for the link. I spent a while looking for the page, just couldn't find it. Thanks heaps.

      Comment


      • #4
        Another option is to make your own. I cut the bottom out a regular clear plastic drinking cup. The bottom is way smaller than my pf. So i could make it any diameter i want. So it's a perfect fit. I do replace it every now and then as it is a bit flimsy. But for the cost. I think it's a great alternative...

        Comment


        • #5
          Originally posted by David8 View Post
          Another option is to make your own. I cut the bottom out a regular clear plastic drinking cup. The bottom is way smaller than my pf. So i could make it any diameter i want. So it's a perfect fit. I do replace it every now and then as it is a bit flimsy. But for the cost. I think it's a great alternative...
          Yep, will have a play around to see what i can come up with.
          Orphanexpresso are out of stock on the 45mm size anyway.

          Just a question - if it is smaller (by more than a few mm) how does it go with spreading out the grinds to the edge of the pf?
          Ta

          Comment


          • #6
            I use a plastic cup that we had brought from Ikea for the kids,very strong plastic just cut it so it only sits inside the portafilter a couple of ml

            Comment


            • #7
              I have one of the orphan espresso funnels for my PVL. great idea, makes a lot of sense and really simplifies the dosing procedure.

              Comment


              • #8
                Originally posted by early_morning_ View Post
                I have one of the orphan espresso funnels for my PVL. great idea, makes a lot of sense and really simplifies the dosing procedure.
                Ok, great to hear.
                Where did you get it from?
                Thanks

                Comment


                • #9
                  I also have an OE one, it's not funnel shaped though just an extension going up from the pf, I find it's more about keeping all the coffee in the pf rather than dispersing it.

                  As far as I know you can only get them from OE, which I don't think is an issue, they ship to Australia. I was lucky enough to come across someone selling theirs on here though and snapped it up

                  Comment


                  • #10
                    Originally posted by Beenz View Post
                    Just a question - if it is smaller (by more than a few mm) how does it go with spreading out the grinds to the edge of the pf?
                    Well. There is always a little gap... But a little vertical tap on the bench sorts it.

                    Comment


                    • #11
                      I use a trimmed yoghurt carton. It's perfect.

                      Trim the bottom up until it just fits into the PF. Then trim the top to the height you want.

                      Greg

                      Comment


                      • #12
                        I have made a funnel out of an old E61 shower screen and group gasket.

                        Simply cut the bottom off the shower screen to make a funnel. *
                        Make the funnel as deep as possible by cutting as close as possible to its screen. This is easily done using one of the thin cutoff wheels on a 100mm angle grinder and finished off with emery paper to smoothen the cut edges.
                        The old group gasket is then installed around the funnel and slid to its top. It's position would be the same as it was when used originally on an E61 group.

                        The gasket provides a support for the funnel to sit on top of the portafilter and it's weight adds to its stability during use.*

                        To use the funnel is placed on top of portafilter and the coffee grids placed into the filter to a level above the top of the portafilter. The portafilter is then tapped to compress the grinds. The funnel is then removed and turned upside down to be used to level the coffee to the top of the portafilter.*
                        Obviously enough coffee grinds are placed in the filter to active a level surface after leveling.

                        The advantage of this method is that it only takes one set of taps and it achieves a very consistent density of coffee across the the width of the puck.
                        If your coffee grinder produces clumps these can be broken up with a thin wire before removing the funnel.

                        Comment


                        • #13
                          Hi All,
                          Do any site sponsors sell these in Australia? If not does anyone know if they are sold here or do you purchase via the website?
                          Cheers
                          Dr Dave

                          Comment


                          • #14
                            ok, so a few home made ones and a few bought from oe. might make one up before thinking about buying one.
                            So they are only available from oe?
                            do people prefer ones that make it higher, or wider?
                            Next job- scouring through kitchen look for 44/45mm cups/jars etc!

                            Comment


                            • #15
                              As far as I know you can only order them from Orphanespresso direct, the shipping to Australia is less than $10 as I recall.

                              Comment

                              Working...
                              X