Announcement

Collapse
No announcement yet.

Breville BGG450 - modification

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Breville BGG450 - modification

    Ooops, it was BCG450, found some of the threads now.

    A number of years ago there was a thread on here with a link to an article on modifying the above grinder to get a finer grind.
    I did that and it worked, but I would like to find the link and article again.

    If anyone remembers it and can give me a pointer I would be grateful.

    I want to try to make my grind finer.
    Last edited by rawill; 1 March 2013, 07:11 PM.

  • #2
    Re: Breville BGG450 - modification

    G'day Rawill,
    try this thread http://coffeesnobs.com.au/showthread.php?t=26264
    Good luck,
    Steve

    Comment


    • #3
      Had one for about 3 months prior to getting an ex-commercial cheap. You have to remember that the mod will leave the machine with no safety stop i.e. you wind it down too much and the burrs will clash and even potentially lock together so tread carefully

      It did the job though... was more than fine enough for my 1st E61.

      Comment

      Working...
      X