Announcement

Collapse
No announcement yet.

em 480 bottom burr

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • hoolahoopa
    replied
    Pulled him apart the movement is coming from the shaft. So put him back together and leave him alone i think.
    On a side note geez there was some grinds left in there in after a good blow with the compressor, think i will be pulling the cover off more often.

    Leave a comment:


  • hoolahoopa
    replied
    Seems to grind fine though of late have noticed it needs a lot more fiddling getting the grind right. Have never had it apart eg. bottom burr out maybe a play around is on the cards.
    cheers

    Leave a comment:


  • Journeyman
    replied
    Shouldn't be much sideways movement; mine is barely noticeable.

    Does it grind OK? If not, did you get the little lug on the base of the burr into the hole it is meant to go in?

    Leave a comment:


  • hoolahoopa
    started a topic em 480 bottom burr

    em 480 bottom burr

    Hi everyone, out of curiosity all those with the above grinder can you give me an idea of the freeplay in the bottom burr.
    I cleaned mine out the other day and had never noticed before, but there seems to be a fair bit of play in mine (sideways movement) and are wondering if yours is the same.
    Cheers
    Chad
Working...
X