Just noticed some lateral movement of rockys hopper, difficult to measure but finger pressure on top of the hopper is showing about 1 mil maybe a bit more of lateral movement, grinder is getting on to 3 months old, never noticed it before but never looked for it either, just thought everything is fine as the hopper does not shake in use.
I dont know how much movement is within the manufacturers tolerance, can any one advise, or maybe post how much there rocky has using gentle finger pressure.
Not sure which way to go with it, send it back and be without it for 2 or 3 weeks maybe to be told it is within spec.
Do the teflon tape mod, or my current fix of resting my spare hand on the lid with a bit of downward pressure.
I dont know how much movement is within the manufacturers tolerance, can any one advise, or maybe post how much there rocky has using gentle finger pressure.
Not sure which way to go with it, send it back and be without it for 2 or 3 weeks maybe to be told it is within spec.
Do the teflon tape mod, or my current fix of resting my spare hand on the lid with a bit of downward pressure.

Comment