If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Originally posted by simsy link=1217589615/0#0 date=1217589615
Can any M4 owners give me a tip here. Acquainting myself with the dosing mechanism and I turned the doser dial clockwise to reduce the size of the dose - success. Tried to turn it back anticlockwise to increase the dose but no movement???
There is a gap for a screwdriver but does it need that level of force to move, given I could decrease the dosage with my fingertips?
CTGTC
You will need a flat blade screwdriver simsy. An alternate is to push down on the metal wipe which sweeps each segment and then the doser dial may be easier to move...
Can any M4 owners give me a tip here. Acquainting myself with the dosing mechanism and I turned the doser dial clockwise to reduce the size of the dose - success. Tried to turn it back anticlockwise to increase the dose but no movement???
There is a gap for a screwdriver but does it need that level of force to move, given I could decrease the dosage with my fingertips?
Leave a comment: