Announcement

Collapse
No announcement yet.

Help can't disassemble cunill motor

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Ashrafohm
    replied
    Originally posted by Lyrebird View Post
    Looks to be pressed on to the shaft, a three arm bearing puller with a very shallow angle of attack would be the weapon of choice.

    Alternative (if you don't want the motor) is to drill out the shaft, a drill press will make that easier.
    Thanks a lot for the tip really helped me

    I have inserted a strong wire under the plate and pulled it successfully .. thank you very much

    Leave a comment:


  • Ashrafohm
    replied
    Originally posted by Lyrebird View Post
    Looks to be pressed on to the shaft, a three arm bearing puller with a very shallow angle of attack would be the weapon of choice.

    Alternative (if you don't want the motor) is to drill out the shaft, a drill press will make that easier.
    Thanks for answering my question

    Actually I need the motor and I don't have that tool you told me about

    I have a big hard screw driver I have inserted under and tried to push it up .. I think it moved a bit up but I was afraid to continue if I'm doing something wrong so I've posted here

    Also if it is ok and I could pull it with this screw driver how will I put it back again with that force !!

    Leave a comment:


  • Lyrebird
    replied
    Looks to be pressed on to the shaft, a three arm bearing puller with a very shallow angle of attack would be the weapon of choice.

    Alternative (if you don't want the motor) is to drill out the shaft, a drill press will make that easier.

    Leave a comment:


  • Ashrafohm
    started a topic Help can't disassemble cunill motor

    Help can't disassemble cunill motor




    I need to remove that upper rotating disk having 3 fins actually to clean it separately and clean what is under it don't need the motor itself .. I've just bought it and it is in a horrible condition and it needs hard work


Working...
X