hg with variable temp readout

[tonee]

check this one out

[A_M]

Re: hg with variable temp readout

LCD does not mean it is a better HG.."variable temp"..... Would hope it was not fixed

And get two or three side by side and they will not read the same..

You want a quality HG that has stable and controllable Heat and if possible air flow..

Mine does; but would not waist it on coffee beans That is what a cheep TO does.

[Yelta]

Re: hg with variable temp readout

Ive been using a Bosch PHG 630 DCE with great success over the past 6 months or so http://www.bosch-presse.de/TBWebDB/en-US/PressText.cfm?CFID=1705465&CFTOKEN=a128df0c3ad1a1f d-C70D0198-E76B-5BBC-8C0E3E8AEC157D90&id=1429
Very good heat control and variable air flow.
No temp stability problems, it just does exactly whats needed.
Bosch have had them in their range since 2003 so they must be a reliable unit, had mine for about 6 years and has done heaps of work stripping paint before it assumed its present role.

[A_M]

Re: hg with variable temp readout

Ive been using a Bosch PHG 630 DCE with great success over the past 6 months or so http://www.bosch-presse.de/TBWebDB/en-US/PressText.cfm?CFID=1705465&CFTOKEN=a128df0c3ad1a1f d-C70D0198-E76B-5BBC-8C0E3E8AEC157D90&id=1429
very good heat control and variable air flow.
No temp stability problems, it just does exactly whats needed.

It is a BOSH... Would expect nothing else..

My old BOSH drill still out performs all teh new ones.. But after 10 years teh batteries are not holding charge as well as they could..

[Yelta]

Re: hg with variable temp readout

Ive been using a Bosch PHG 630 DCE with great success over the past 6 months or so http://www.bosch-presse.de/TBWebDB/en-US/PressText.cfm?CFID=1705465&CFTOKEN=a128df0c3ad1a1f d-C70D0198-E76B-5BBC-8C0E3E8AEC157D90&id=1429
very good heat control and variable air flow.
No temp stability problems, it just does exactly whats needed.

It is a BOSH... Would expect nothing else..

My old BOSH drill still out performs all teh new ones.. But after 10 years teh batteries are not holding charge as well as they could..

Ive got a Bosch electric drill thats over 30 years old and has been well used, replaced the power cord once and it still runs like a clock, mind you the Makita cordless is the go to drill nowadays.

[tonee]

Re: hg with variable temp readout

ok ill consider all these and any more comments about heat gun recommendations.
thankyou

[Dimal]

Re: hg with variable temp readout

Yep.....

Metabo, Makita, Milwaukee, DeWalt for example, all make trade quality tools and worth a look. Ive gone with a Metabo HG as personal experience with this manufacturer over the years has been excellent in both home use and industrial use.....

Mal.

[lindsayra]

Re: hg with variable temp readout

ok iill consider all these and any more comments about heat gun recommendations.
thankyou

Hi tonee,

Im holding out on Bunnings or Aldi doing the right thing leading up to Fathers day with a $20 2000W HG.

I would be happy with a basic 2000W unit and 12 month warranty.

Lindsay