Gene cafe e4 error

[greenbe]

Re: Gene cafe e4 error

Thanks for that l ended up finding that one on avacuppa.

[hazbean]

Re: Gene cafe e4 error

Below is a pic of my heater.

Its not too difficult to replace. There are two good sets of instructions on the web, one at avacuppa, and another at the coffeetime wiki. I used both.

If there is no heat, then it is pretty likely to be the heater ... But contact avacuppa before buying it, they are very helpful.

[A_M]

Re: Gene cafe e4 error

Thanks for the link l saw that a pity they dont show a picture.

Just use the Google search and all is  reviled 120V version.

[greenbe]

Re: Gene cafe e4 error

Thanks for the link l saw that a pity they dont show a picture.

[Dennis]

Re: Gene cafe e4 error

E4 is "Increase of the temperature in the temp. sensor 2 is detected" and = "Heater disconnection fan or sensor broken"

Perhaps its this, though give them a call first.

[A_M]

Re: Gene cafe e4 error

Hi all,
My gene cafe roaster is comming up with an e4 fault.
It is turning but there is no heat.
l guess it is the element or heat sensor,it is out of warranty so l will have to fix it my self .Has anyone done this operation before.
cheers

Where are you located ?

See ya supplier for assistance, may be just the Fan OR Heater ?

As it is dealing with High Voltages and you have to disassemble, it could well mean a Licensed persons. As such your supplier may or may not provide the part directly to you, as not defined as User Replaceable part.

Then again who knows...

Try the Sponsor / Supplier first.

[greenbe]

Hi all,
My gene cafe roaster is comming up with an e4 fault.
It is turning but there is no heat.
l guess it is the element or heat sensor,it is out of warranty so l will have to fix it my self .Has anyone done this operation before.
cheers