iroast2 needs help

[hazbean]

After considerable rummaging, I found some information.

It is a JST (Japan Solderless Terminals) XH 3 connector:

J.S.T. Mfg. Co., Ltd.

and pictured here:

Connector/Adaptor: 3 Pin Female JST(XH) connector

Often used in battery packs and chargers, and by hobbyists.

I had a couple of spares (now gone) that I purchased from a hobby shop in FNQ, but it has now closed.

They can now be purchased from element 14 (was Farnells).

Or try this place:

PROLUX FEMALE JST EH TO MALE JST XH CONNECTOR SET. 2, 3 & 4 CELL - Model Engines

which seems to be a distributor, and may be able to suggest a retailer close by where you could get one.

If you have trouble getting one quickly, I could pull the connector of my to-be-repaired-one-day iRoast out the back and send it to you, and you could replace it when you do track one down.

Let's know how it goes ....

[D4MMO]

iv already taken it to jaycar electronics and they couldnt help me out. i searched the net with no luck.
any help will be great.
thanks

[hazbean]

I did have a catalogue number for this connector a few years ago but I'm not sure if I kept a record of it, will try to dig it up over the next couple of days. I remember it did take a while to find it.

If you try an electronics component shop (eg Aztronics) they may have something compatible.

[D4MMO]

hey guys i was attempting the resistor mod and i accidentally broke the plastic the connector the resistor sits in.
does anyone have any idea where it is called and more importantly where i can get a new one from?
thanks in advance