For sale:
- EK43S grinder, purchased July 2020. Comes with stock hopper, stock hopper adapter, stock "post-2015" burrs and stock burr carrier.
Extras:
- Titus high uniformity (HU) burrs and burr carrier. Moving burr and carrier have been radially aligned by Frank at Titus prior to delivery to within 3nm. Coating is a proprietary Titus multi-layer TiCN & TiAlN formula.
- Titus break plate. Replaces stock Mahlkonig break plate as a more precise fit to reduce the characteristic clicks an EK43/S typically make without.
- Titus alignment tool. Used to axially align burrs for better grind uniformity. Comes with aluminium shims to place between burrs and carrier which are marked with their respective width in mm (see images)
- Mahlkonig short hopper with spring-loaded gate for workflow convenience. Holds approximately 1-1.25kg of coffee but is mostly targeted toward single dosing.
- 1 tube food-grade lubricant for use after cleaning/maintenance on the grind chamber.
Selling due to downsizing/too much equipment. Great grinder that I have managed to align extremely well without the need for the shims that came with the alignment tool. Has been used for 2-3 per day for a year after purchase, however in the last 12 months has been used for less than 1 a day. A formidable all-rounder, making excellent espresso and filter, ideally for someone that wants an endgame grinder that can do it all. Never had an issue, has been cleaned every week and the only damage is a very small scratch on one of the arms (see final image below).
Asking $4000 AUD, willing to negotiate. Shipping from Melbourne at buyer's expense if pickup not an option.
- EK43S grinder, purchased July 2020. Comes with stock hopper, stock hopper adapter, stock "post-2015" burrs and stock burr carrier.
Extras:
- Titus high uniformity (HU) burrs and burr carrier. Moving burr and carrier have been radially aligned by Frank at Titus prior to delivery to within 3nm. Coating is a proprietary Titus multi-layer TiCN & TiAlN formula.
- Titus break plate. Replaces stock Mahlkonig break plate as a more precise fit to reduce the characteristic clicks an EK43/S typically make without.
- Titus alignment tool. Used to axially align burrs for better grind uniformity. Comes with aluminium shims to place between burrs and carrier which are marked with their respective width in mm (see images)
- Mahlkonig short hopper with spring-loaded gate for workflow convenience. Holds approximately 1-1.25kg of coffee but is mostly targeted toward single dosing.
- 1 tube food-grade lubricant for use after cleaning/maintenance on the grind chamber.
Selling due to downsizing/too much equipment. Great grinder that I have managed to align extremely well without the need for the shims that came with the alignment tool. Has been used for 2-3 per day for a year after purchase, however in the last 12 months has been used for less than 1 a day. A formidable all-rounder, making excellent espresso and filter, ideally for someone that wants an endgame grinder that can do it all. Never had an issue, has been cleaned every week and the only damage is a very small scratch on one of the arms (see final image below).
Asking $4000 AUD, willing to negotiate. Shipping from Melbourne at buyer's expense if pickup not an option.

Comment