Tweet
Hi All,
I have PIDd & modified Imat Quaha Jnr Series II but it currently has a leaky boiler.
Ive used this to help me upgrade to HX machine so Ive got this machine to sell. It is something fairly simple but probably cheaper if you did it yourself.
The machines where OEMd under a few brand names such as Imat, Quaha, Lelit, Nemox, Mokita, etc.
Looking for $450 for this. If your interested read on.
Imat Quaha Junior II with the following accessories
- Single & Dual Baskets
- 57mm hardwood tamper
- Backflush disk
- Milk Steamer attachment for the Steam wand (never really used)
The Imat has been heavily modified by the previous owner (another CS member) to improve heat stability and recovery. It has the following:
- Installed a PID + SSR
- Heat wrapped the boiler
- extended the water intake tube to pre-heat around the boiler
- added weight to the machine to keep it planted
- replaced the feet with wider, higher and better gripping ones
- added a better chrome light
- added a resettable fuse
- added a momentary switch to trigger the pump (to added water to the boiler during long milk steaming runs)
I had the pump replaced early last year (by QCMS) but for the two years Ive had it, it has been otherwise faultless.
Usually 4-6 milk coffees a day but never missed a beat at xmas or dinner parties.
What needs attention.
Ive removed the group shroud to clean and replace the group seal, screen and group head. This loosened the bottom of the boiler and it now leaks.
The steam arm is very loose and probably could be replaced, It had a small leak but I havent tested it recently.
The portafilter spout has lost its thread to join on the the portafilter. I dont use it but you may want to get a new spout from coffeeparts.
Let me know if you need any further info. Some links to this machine is below.
Review on the Combi version http://coffeegeek.com/reviews/consumer/nemoxopera/gregpullman/1439
Imat & general tips http://coffeetamper.com.au/**/imat/
Cheers.
I have PIDd & modified Imat Quaha Jnr Series II but it currently has a leaky boiler.
Ive used this to help me upgrade to HX machine so Ive got this machine to sell. It is something fairly simple but probably cheaper if you did it yourself.
The machines where OEMd under a few brand names such as Imat, Quaha, Lelit, Nemox, Mokita, etc.
Looking for $450 for this. If your interested read on.
Imat Quaha Junior II with the following accessories
- Single & Dual Baskets
- 57mm hardwood tamper
- Backflush disk
- Milk Steamer attachment for the Steam wand (never really used)
The Imat has been heavily modified by the previous owner (another CS member) to improve heat stability and recovery. It has the following:
- Installed a PID + SSR
- Heat wrapped the boiler
- extended the water intake tube to pre-heat around the boiler
- added weight to the machine to keep it planted
- replaced the feet with wider, higher and better gripping ones
- added a better chrome light
- added a resettable fuse
- added a momentary switch to trigger the pump (to added water to the boiler during long milk steaming runs)
I had the pump replaced early last year (by QCMS) but for the two years Ive had it, it has been otherwise faultless.
Usually 4-6 milk coffees a day but never missed a beat at xmas or dinner parties.
What needs attention.
Ive removed the group shroud to clean and replace the group seal, screen and group head. This loosened the bottom of the boiler and it now leaks.
The steam arm is very loose and probably could be replaced, It had a small leak but I havent tested it recently.
The portafilter spout has lost its thread to join on the the portafilter. I dont use it but you may want to get a new spout from coffeeparts.
Let me know if you need any further info. Some links to this machine is below.
Review on the Combi version http://coffeegeek.com/reviews/consumer/nemoxopera/gregpullman/1439
Imat & general tips http://coffeetamper.com.au/**/imat/
Cheers.
Comment