Announcement

Collapse
No announcement yet.

WANTED NonPressurd PF to fit Breville 800ES

Collapse
This topic is closed.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • WANTED NonPressurd PF to fit Breville 800ES

    Does anyone have or know where I can get a Non pressurized PF basket single and double to fit the Breville 800 ES machine.
    I live in Perth.
    (I dont even know how much these things cost. What am I looking at cost wise to be a reasonable price?)

    I have seen the Sunbeam PF baskets like the Breville (Crema Enhancers) and they look exactly the same. Same little single and double cup picture on the bottom of it. Maybe a Sunbeam PF basket will fit my machine as well.

    I want to see the difference a Non poressurised Basket to the Crema enchancer baskets is on a shot.


  • #2
    Re: WANTED NonPressurd PF to fit Breville 800ES

    The Goodies,

    What diameter (internal) is the PF?..... a lot of the smaller than 58mm pfs will take saeco baskets (look up the saeco agents here in Perth and take your PF in) .... you will probably find they will have a non pressurised basket which will fit.

    Each basket will cost you about $12..... and make a HUGE difference to the quality of the espresso...

    But you will then need a good grinder and tamper which fits the basket closely.... use the 13.5 KG tamp etc.....

    non pressurised baskets are not forgiving like the pressurised ones are.....

    Comment


    • #3
      Re: WANTED NonPressurd PF to fit Breville 800ES

      Id imagine infinitely better if you have your dosing, distribution and tamping technique downpat. I received a box of pressurised baskets with my EM6910....threw at the back of some cupboard somewhere never to be found for another million years.

      Comment


      • #4
        Re: WANTED NonPressurd PF to fit Breville 800ES

        Originally posted by JavaB link=1171026741/0#1 date=1171027352
        The Goodies,

        What diameter (internal) is the PF?..... a lot of the smaller than 58mm pfs will take saeco baskets
        I recently bought a S/S tamper which was 51mm but I still have about 1mm play, so it would be about a 52mm PF basket.

        Certainly would be a lot more convinent if it was the standard commercial size of 58mm.

        Comment


        • #5
          Re: WANTED NonPressurd PF to fit Breville 800ES

          Well Id give the saeco baskets a try..... there is a major saeco service agent here in Perth.... I got baskets for the Solis SL90 which I had that way.....

          Comment


          • #6
            Re: WANTED NonPressurd PF to fit Breville 800ES

            Thanks JavaB I will look them up. Hope they are not too far away, I am in Clarkson (North of the River)

            Hey, I just realised, I can wave my bat in the air as I have scored my first 50 runs (posts) woo hoo!

            "The Goodies Raises his tamper and salutes the crowd"

            Comment


            • #7
              Re: WANTED NonPressurd PF to fit Breville 800ES

              Congrats on your first 50...... Im just a couple ahead of you in the run fest


              The agents are on Scarborough Beach Road...... so not TOO bad!!

              Comment

              Working...
              X