Results 1 to 8 of 8

Thread: Help please, how to change Behmor bulb?

  1. #1
    Member
    Join Date
    Sep 2011
    Location
    Sydney
    Posts
    39

    Help please, how to change Behmor bulb?

    Gene Cafe Coffee Roaster $850 - Free Beans Free Freight
    Hi CS's,

    I'm hoping that someone might be able to help me out please. I do feel a bit stupid asking this question, but I'm struggling to work out how to replace the bulb in my Behmor.

    I'm able to take the glass plate off, but then I'm can't work out if I need to twist, pull, or push & then pull the bulb out. And I'm concerned that if I use too much force I might accidentally break the bulb in the holder.

    Could someone please help me out? I'd love some advice and also any tips on where to buy a replacement.

    Thanks so much in advance,
    Jon

  2. #2
    Junior Member
    Join Date
    Aug 2013
    Location
    Harristown, Queensland, Australia
    Posts
    1
    Just pulled bulb out today, actually searching to see whats best option for a replacement (since i can only seem to find a 15w or 25w)

    As for removing the bulb, its an edison (screw in type) so it needs to be unscrewed anticlockwise. It was to tight for me to unscrew, so I had to remove the Behmor's side cover so i could hold the top of the light cover steady while unscrewing it

    anyone know best option as a replacement? im assuming its a E14 but as mentioned locally i seem to only find 15w or 25w

  3. #3
    Member
    Join Date
    Sep 2011
    Location
    Sydney
    Posts
    39
    Thanks so much LorraineLavers for the tip to take it out.
    Hopefully we'll find out what the best option is to replace it with.

  4. #4
    Senior Member daledugahole's Avatar
    Join Date
    Nov 2012
    Location
    Port Macquarie, NSW
    Posts
    115
    I just changed mine this week. Apparently slamming door shut to dislodge all the hidey bits if chaff was a bad idea (dope). Couldn't get it at 'big green shop' but was able to get one from a specialty light store no probs. it's a 25 watt though and is working fine touch wood. Glass came out with a little jiggle after taking the two screws out. Was working with a torch for a while there!

  5. #5
    Senior Member daledugahole's Avatar
    Join Date
    Nov 2012
    Location
    Port Macquarie, NSW
    Posts
    115
    Found the little box too...
    It's a 'Crompton Lighting' (brand). 25watt Microwave E17 clear.
    Pilot T22. Code 10225. (Nil idea what all that means)
    That's what I've thrown in anyway!
    Good luck.

  6. #6
    Member
    Join Date
    Sep 2011
    Location
    Sydney
    Posts
    39
    Awesome. Thanks Daledugahole.

  7. #7
    Junior Member
    Join Date
    May 2008
    Location
    Brisbane
    Posts
    12
    Is it possible to get a brighter light in there? maybe a 40W ?

  8. #8
    CoffeeSnobs Owner Andy's Avatar
    Join Date
    Mar 2004
    Location
    Internet
    Posts
    17,499
    Behmor Coffee Roaster
    This was a 5.5 year old conversation.

    I doubt you'll get a 40w, these are high temperature "microwave oven" globes but you might find something else that could work.



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •